Products > Salt Saturators > Pumping Brine

Pumping Brine

Pumping Brine from the saturator is simple. All pumping actions can be controlled by the buttons on the front of the unit. All pumping choices are relayed back to the user to make sure that they have correctly attached any hoses and also made sure the valves are in the correct position.

Considering the pump is one of the more expensive components of the system and where failure can have a catastrophic effect, we have put in a number of safety features to protect against human error and system failure.

1. Pump Flow Sensor: Detects if there is brine flowing through the pipes. Shuts off the pump automatically if no flow is detected.
   
2. Pump Timeout: The pump will only run for a period of time and then shut off
   
3. Valve Position Reminder: On screen reminder that the valves are in the correct position
   

If the BS saturator is configured with storage tanks it will have an additional pump. This pump will automatically fill each storage tank during the production process.

Further Info:

Click on the links below for more information:

• Dynamic User Interface
• Automatic Production
• Error Handling
• Pumping Brine
• Remote Support